CYCLONES SEPARATORS
Exhaust Emission and Pollution Control Systems
EXHAUST EMISSION AND POLLUTION CONTROL SYSTEMS
Technological requirements, legislative pressures, and last but not least a growing environmental concern by the population at large have led to substantial improvements in particle separation from gases during the past few years.
Correctly engineered and well-maintained emission control systems have a proven record of performance for fine particle separation.
We at RAYGM offers customized emission control systems for our customer needs, truly engineered to meet legislative requirements with lowest possible CAPEX + OPEX.
Our Customised Emission Control Products include
1. Cyclone Separators
2. Bag Filter (Bag House)
3. Wet and Dry Scrubbers.
1. HIGH EFFICIENCY CYCLONES.
Cyclones provide a relatively low-cost method of removing particulate matter from exhaust gas streams. Cyclones are somewhat more complicated in design than simple gravity settling systems, and their removal efficiency is accordingly much better than that of settling chambers. Cyclones are often installed as pre-cleaners before these more effective devices.
The range of particle sizes collected in a cyclone is dependent upon the overall diameter and relative dimensions of the device. Various refinements such as the use of skimmers, turning vanes, improve efficiency. Stacking cyclones in series or in parallel can provide further alternatives for improving overall collection efficiency.
RAYGM HIGH EFFICIENCY CYCLONES DESIGN AND MANUFACTURING RANGE
Design
- Custom Designed to Customer Satisfaction
- Sturdy Designs for Long life.
- Designed for lowest Possible pressure drop.
Sizes Offered
- 10 cm to 2.5 meters
Designs Offred
- Cyclones In Series.
- Cyclones in Parallel.
- Battery of Axial Flow Cyclones.
Dust Separation Efficiency
- 98% for Particles ≥ 8 microns.
Maximum Air Quantity
- As per customer requirement.
Material
- Carbon Steel Hardox / Vautid Lined, Carbon Steel refractory lined, Carbon Steel Spray Galvanized, Stainless Steel 304, Stainless Steel 316, Stainless Steel 321, Stainless Steel 310, etc.
Features
- Requires No Expensive Filters
- Maintenance Free
- Good Recovery of Materials at lowest capital cost.
- Low Pressure Drop and power consumption
