BAG FILTER (BAG HOUSE)
Exhaust Emission and Pollution Control Systems
EXHAUST EMISSION AND POLLUTION CONTROL SYSTEMS
Technological requirements, legislative pressures, and last but not least a growing environmental concern by the population at large have led to substantial improvements in particle separation from gases during the past few years.
Correctly engineered and well-maintained emission control systems have a proven record of performance for fine particle separation.
We at RAYGM offers customized emission control systems for our customer needs, truly engineered to meet legislative requirements with lowest possible CAPEX + OPEX.
Our Customised Emission Control Products include
1. Cyclone Separators
2. Bag Filter (Bag House)
3. Wet and Dry Scrubbers.
2. HIGH EFFICIENCY BAG FILTER (BAG HOUSE)
Fibrous filter media have acquired a firm place in today’s separation technology. They are the medium and technique of choice when efficient separation is required.
Dust laden air is drawn in the bag house and passed through filter media. The initial filtering phase takes place within the interior of the medium and then relocated to the surface. Thus, the filter cake deposited on the surface becomes the actual filter medium, which can reach separation efficiencies of more than 99.9 %. As the layer of dust increases the filter resistance rises. The Cleaned air exits through exhaust duct.
Dust collectors are supplied with compressed air headers, Solenoid valves and timers. With the help of timers compressed air is blown in the bags which draws surrounding air with Ventury effect in the bags giving reverse blow which disengages the dust on the filter media and gets collected at the bottom of the Bag filter, regularly discharged through and Rotary Valve or Screw conveyor.
RAYGM HIGH EFFICIENCY BAG FILTER (BAG HOUSE) DESIGN AND MANUFACTURING RANGE
Design
- Custom Designed to Customer Satisfaction
- Sturdy Designs for Long life.
- Designed for lowest Possible pressure drop.
- Properly designed for various dust with proper CAN Velocity and Interstitial Velocity.
Configuration
- Rectangular (Modular) Type
- Circular type
Air Entry Designs
- Bottom Hopper Central Entry
- Tangential Entry
- Multi Entry and Exits.
Top Plenum Configuration
- Top access
- Walk through pent house
Dust Separation Efficiency
- 99% for Particles ≥ 1 microns.
- Max Emission of 20 ppm for ≤ Pm2.5 particles
Maximum Air Quantity
- As per customer requirement.
Material
- Carbon Steel Hardox / Vautid Lined, Carbon Steel refractory lined, Carbon Steel Spray Galvanized, Stainless Steel 304, Stainless Steel 316, Stainless Steel 321, Stainless Steel 310, etc.
Features
- Low Pressure Drop and power consumption
- Fully insulated and hopper heat traced designs for avoiding condensation in the hopper
- Antistatic design with proper earthing system for every bag on demand
- Installation of Fire hydrant headers for combustible dust.
- Installation of Explosion vents, flame arrestors, Chemical suppression / Isolation etc.
- Special Bags for moisture laden air, High temperature air etc.
